logo15x26_2 NO BACK GROUND.jpg (41854 bytes)                                  fsatellite.jpg (1052 bytes) 48'' Polar fsatellite.jpg (1052 bytes)

                                                     'The' Antenna Manufacturer!

                                                                                             flag.gif (12532 bytes)

 

   Home

   Mounts

   Satellite Gallery

             

This unit was designed for the 3m antenna for our many commercial applications.  Since then it has been used for the 2.7m (9') and on occasion the 2.4m (8') antennas.  This unit is tested with our other mounts and is approved for 125 MPH wind speeds.  It uses a 48" back ring and is made to fit over the 5 1/2" base post.

Features:
  • 48" Back Frame
  • Bronze Bushing at Pivot Points
  • Top and Bottom Frames are Tubes for more Strength
  • Stainless Steel Hardware
  • Four Back Braces
  • Standard with Locking Bar
  • Quad Feed Struts and Collar
  • When Used with 36" Actuator can have over 100 deg. of Travel
 Options:
  • Hot Dipped Galvanizing
  • Base Stand or Base Post
  • Heavy Duty Feed Assembly for 4 Port Feeds
  • Dish Cover
  • Half/Full Dish De-Icing
  • Non-Penetrating Roof Mounts
  • Electronics, Feed Horns, LNB's, Receivers, and Controllers

Questions?  Call 1-800-627-9443 or (608)326-8406.

Send mail to dhsat@mhtc.net with questions or comments about this web site.
Any and all information within this web site, inclusive of links to other web sites, is neither warranted nor guaranteed to be accurate. DH Satellite Inc. assumes no liability with regards to the accuracy of any information or prices posted within this or hyper-linked web sites. All prices are subject to change without notice.
Copyright © 2001 DH Satellite
Last Updated June 16, 2005

effici1.jpg (6998 bytes)