• Dual Idlers to Maximize Travel Efficiency
• 36 Volt DC Motors
• Pulse Sensors - Reed & Hall Effect
• Stainless Steel Hardware
• Idler Sprockets - to improve movement & decrease maintenance
• 60" Back Ring
• 36" Bearing Hub
• 8 Back Braces
• Space Age Oil Impregnated Bearing Surface
• 0-90° Elevation
• 200° + Azimuth Travel
• 15" Reinforced Base
• Quad Feed Struts w/Collar
• AZ\EL Lock Downs for Severe Weather
• Heavy duty gear box - To Chain Drive
• P.C. Compatible Drive System with
  • Automatic Positioning
  • Non-volatile Memory
  • RS-422 PC Control Interface
  • High Resolution Sensor Processing
  • Dual Speed
  • 50 Satellites & Polarity Memory
  • Windows 95, 98, 2000 Compatible

• Hot Dip Galvanizing
• Non-Penetrating Roof Mount
• Electronics, Feedhorns, LNBS, Receivers, Cabling
• Half/Full Dish Deicing

The Most Stable Dual Drive Azimuth/Elevation Dish Drive System Available

The Ultimate System is a Dual Powered Azimuth Elevation Mount.   Commercial use demands a solid and stable mount for high winds and gusty conditions.  Our unit was designed from the ground up with a 15" diameter steel pipe stand.  The current model is the fourth generation design and has very few changes over its predecessor.  The pivot is much like a crane base between two heavy steel plates that are machined with a new space-age oil impregnated bearing surface.   The Gearbox and Elevation Drive are weather protected.